Installation

Ensure the brakes are cool before starting the installation.

Clean the surface of the brake calipers using a degreaser or brake cleaner to remove dirt and grease.

Test fit the caliper covers over your existing calipers.

If the cover does not sit flush, use a cutting tool (such as a Dremel or sandpaper) to carefully trim the edges for a better fit.

Use a high-temperature adhesive specifically designed for automotive applications.

Apply a generous but controlled amount of glue to the outer surface of the brake caliper where the cover will be attached.

Avoid excessive glue that may interfere with brake operation.

Firmly press the caliper cover onto the glued surface.

Hold it in place for at least 1-2 minutes to ensure a strong bond.

Allow the adhesive to cure as per the manufacturer's instructions (usually a few hours).

Once fully dried, gently test the cover to ensure it is secure before driving.